Does your job come in contact with water or mud? It’s bad if your feet are always wet when working. You need to have a pair of waterproof boots to protect your feet.
If not, you can completely transform your current boots into waterproof. Do you know how Work Boots Insider can waterproof my work boots? Please refer to this article to find the answer.
How to Waterproof Work Boots?
- Waterproof work boots with creams, pastes, and waxes
- Waterproof work boots with waterproofing spray
- Waterproof work boots with the desperate DIY way
There are three ways to waterproof your work boots. Either way, it’s very simple and effective to protect your feet. Consider how you should do it for the best results. However, we believe that all three are very useful in different situations.
Waterproof Work Boots with Waterproof Creams, Pastes and Waxes
This is the simplest and fastest way to waterproof your boots, but if you want to keep your toes dry, you’ll need to reapply every few weeks. The steps are as follows:
- Step 1: First, you wash your boots very clean to remove all mud and dirt. Please use soap and brush for more effective cleaning.
- Step 2: Next, mix the waterproof cream, paste and wax thoroughly. Dip a towel in this mixture. Then rub on the boot in a circular motion. Apply the mixture evenly over the entire boot. Make sure not to miss the seams.
- Step 3: After applying this mixture. Use another towel to wipe off any excess mixture on the boots.
- Step 4: Wait for the boots to dry completely or you can leave it overnight.
Waterproof Work Boots With Waterproofing Spray
If you don’t have time, this is a good choice. Because this way is simple and not time consuming. You should also repeat every one and several weeks to maintain waterproofing.
If your boots are made of smooth leather, you should use silicone or an oil-based spray. If your boots are nubuck or suede, the best choice for you is an acrylic copolymer.
- Step 1: You must clean your boots with shoe cleaner cream or soap and water. Be sure to remove all the dirt for the most effective water repellent.
- Step 2: Hold the spray about 6 inches from the boot. Spray a thin layer of waterproofing agent on the boots. You must spray evenly and do not spray too thick.
- Step 3: Use a fan to dry them or leave them overnight.
Waterproof Work Boots With the Desperate DIY way
You want to waterproof your work boots but do not want to do the above two ways. Because the above two ways are too time consuming and you are in a hurry. You can do it quickly this way.
Usually, these methods are applied before work. But keep in mind that this is only a temporary method. However, you still have to clean your boots like the two steps above. There are 3 solutions for you to choose from in this way.
- Transmission Oil: Take a small amount of transmission oil and apply it evenly to your boots. This oil will hold water well, but it will turn your boots red.
- Clear enamel spray: If you have this clear enamel spray on hand, spray evenly over your boots. This type of solution will not stick for long. Therefore, after a short time, this paint will peel in and crack.
- Lotion: It sounds strange, but lotion can waterproof your boots. Its downside is that it doesn’t last long, so you need to consider it.
What are Work Boots?
Work boots are boots designed to protect workers’ feet. With special materials and designs. People use boots in work environments that are exposed to a lot of water or toxic substances. Work boots are usually made from materials such as plastic, leather or waterproof compounds.
In particular, boots have high ankles to prevent water and harmful substances from contacting the skin. Using protective boots not only protects yourself but also actively participates in building a safe working environment. .
What are the Advantages of Work Boots?
Boots used in work have the maximum effect of protecting the feet. It prevents the feet from coming into contact with water and harmful substances. They are very common in industrial areas or mountains where workers come into contact with them every day.
In addition, boots often have special soles. It has an effective electric shock prevention effect for people working in the electrical industry.
Not using work boots when you have to work in water also causes skin corrosion and nail damage. Therefore, workwear is like a bodyguard to protect your feet no matter what environment you work in.
What Should be Noted when Using Work Boots?
Safety boots are usually waterproof, so they are very tight. So the skin cannot “breathe”. This causes bloating which leads to smelly feet.
So, if you don’t really need it, you should not wear it for a long time. You just need to protect yourself while working and take it off occasionally to let your feet breathe.
In addition, after using protective boots at work, you need to use a soft brush to clean. At the same time, gently massage to make the skin of the feet soft and clean.
While protective gloves are protective gear for hands, boots also protect feet from harm and unwanted consequences. To protect the health and safety of your feet, work boots are an integral part of your work environment.
Above is how I can waterproof my work boots and some useful information about work boots. We hope you will apply some of the ways we have suggested to protect your feet in the best way. Good luck!
I’m Patek Mille, creator of Work Boots Insider. I have compiled information from the most prestigious newspapers and the most skilled craftsmen, help you choose the best poducts suitable your work lives. Follow me below