Every day, not a few people suffer falls due to faulty footwear and the lack of non-slip shoes. This can happen with aged shoes, plastic-sole shoes, or even brand-new pairs.
Wearing such types can make the wearer inconvenient and embarrassed, especially when appearing in public. This is a seemingly not too serious problem at first, but it brings bad consequences from time to time, such as slippery walking, leg pain, or injury.
Luckily, not all hope is lost for your lovely favorite shoes yet. If you are having problems with slippery shoes that cause annoying feelings when moving, refer to the ultimate methods of how to make shoes non-slip down below.
Best Methods On How To Make Shoes Non-slip?
1. Grind the sole with sandpaper or on a rough surface
New shoes’ soles sometimes can be too smooth thus causing slipperiness and unbalance. Sandpaper has the effect of smoothing rough surfaces as well as helping the soles increase friction quickly.
You use sandpaper directly on the shoe sole surface until it feels a bit rough. In this way, you should choose coarse sandpaper over fine one to achieve the desired effect.
Note: This method only works for some types of shoe soles, particularly not possible for products with natural foam soles.
If at that moment you cannot find sandpaper, then the best way is to take advantage of the rough surface at the site, such as stone, gravel, or concrete. You can wear shoes while rubbing the shoe threads on these places – Don’t forget to press your feet for better results.
In addition, a nail file is also a very handy and easy-to-find item to overcome the slippery sole problem in case you cannot find both sandpaper and rough surfaces.
This way will not only help your new shoe soles become softer but also create tiny indentations on them so that they can increase the grip of the shoe, reducing the slippery situation when moving.
2. Use anti-slip sole pads
Not only new kicks are in a slippery condition, but old pairs also have the same issue. Their worn-off sole will no longer ensure a good grip. If they are your most favorites which you do not want to replace, then use anti-slip pads to help create a professional grip for the shoes. You can easily find this support buddy both online and in footwear shops with not more than 2 USD/piece.
The patch has a layer of glue to attach to the sole for easy use, but some people dislike it because the patch often leaves an uncomfortable adhesive layer under the sole when the patch falls off.
3. Use effective anti-slip puff paint
Our next suggestion is to use puff paint, which is commonly used in children’s arts and apparel.
When applying a full layer of the paint on the shoe soles, they will quickly dry, forming a rough coat just enough to increase the grip for the shoe without losing aesthetics. From then on, your new shoes will be more stable and you don’t have to worry about slipperiness when moving.
4. Use a specialized anti-slip spray
In addition to the sole pads, you can quickly get a dedicated spray to create a good grip on the lower part of the sole surface. This helps to minimize unwanted slippage instantly.
However, these products are not widely available yet, and they are often called “traction sprays“. Moreover, the product might be available with different quality, so you really need to find out carefully before deciding to buy. It’s better to ask the salesperson to provide you with information about the product. The price of spray shoe soles is quite high, ranging from 10 USD – 20 USD.
5. Use rubber glue and salt
This approach may sound strange but Workwear Magazine promise it works. It is basically based on the idea of having a rough texture on the shoe sole to improve traction. As a result, the mixture of salt grain and rubber glue does just that.
What you need to do is mix glue with salt in enough ratio. Bear in mind that the more the grains of salt is, the better the grip will be. Then, use a toothbrush to spread a thin layer of the mixture on the heel and sole of your shoes. Finally, dry the shoes thoroughly before wearing them. As another option, you can use sand instead of salt.
6. Score the soles
Another cheap and effective DIY way is scoring your shoe sole to make them non-slip. All you need is a knife, razor blade, or other sharp objects. After having all that, let’s follow the below procedure:
– Hold the shoe upside down.
– Use a knife or sharp object to gently cut short and narrow diagonal lines on your sole.
– Cut other lines in the opposite direction.
By doing that, you just create a cool lattice pattern on your slip-resistant sole which will prevent your shoes from slippery.
Tips For Overcoming Other Shoe Problems
1. How to deodorize shoes instantly?
Wearing shoes regularly in hot and humid weather plus foot sweat will easily make your shoes stinky. If you ignore the situation for a long time, it can affect your legs.
To eliminate unpleasant odors in shoes, Workwear Magazine will show you three very simple, economical but surprisingly effective ways:
– Sprinkle 2 teaspoons of Baking Soda under the sole and leave overnight.
– If you don’t have Baking Soda, you can also replace it with baby powder.
– You can also take advantage of used tea bags by drying and putting them in shoes overnight.
Alternatively, you should also prevent unpleasant odors by leaving shoes in a cool place, cleaning shoes after wearing, and especially choosing a pair of shoes with ventilation holes.
2. How to make wet shoes dry quickly?
Long rains or nagging drizzles make everything around you wet. At this time, your shoes cannot avoid it either. Don’t let this annoyance linger when you can deal with it quickly. With some old newspaper pieces in the house, you just need to tuck them inside your shoes. The newspaper will help absorb moisture in the shoe, helping it dry faster.
In addition to drying your shoes faster, putting newspaper in your shoes also prevents shoes from having a bad smell!
3. How to handle tight shoes?
What do you do when you see a pair of shoes that are beautiful but not your size? Are you like the actor Keira Knightley “If I liked a pair of shoes, would I buy them regardless of my size or not”? Very wasteful, right! If your shoes aren’t too tight, Oak Street will reveal a way to keep your shoes fit!
Let’s do the hack: wear thick wool socks + put shoes on + use the dryer on a tight spot. You will see a miracle happen.
Another little revelation, we recommend you to try on shoes in the afternoon. Because after a day of traveling, the afternoon of arrival, the size of our feet is usually at least half the size of the pot.
4. How to make canvas shoes waterproof?
You have a pair of canvas shoes and you always feel anxious about going in the rain every time because it will make the kicks wet? Forget that worry! Spread just a little honey wax on your shoes, then you can put them on walking in the rain confidently!
Nowadays, people often look for boots/shoes with PU leather to resist water. So, you can refer to the selection of shoes made of this material to not worry about water absorbing problems!
5. How to treat leg blisters after wearing new shoes?
This problem seems extremely problematic for everyone anytime they try on new shoes. To avoid that, you can stick bandages or apply anti-loose wax on the places where your feet are in much contact with shoes.
At the same time, you mix a little warm water, then drop herbal foot massage bags to soak your feet. The blisters will go away quickly. This is also a way to help you relax after a stressful and tiring day at work.
6. How to break in tight shoes?
Among the countless ways to stretch your new shoes, re-tying shoelaces is also a good measure. Though at first, it seemed irrelevant, it really is.
If the shoe you are wearing has a toe trigger, or you feel tight in some places, try a different shoelace. There are many creative ways of tying shoelaces that are both aesthetically pleasing and comfortable at the same time. Why not try it?
As an employee wearing shoes most of the time, it is essential for you to prioritize your safety. Wearing the right pair of non-slip shoes will make you have peace of mind since you know that you are less prone to incurring injuries due to accidental falls.
With the great tips on how to make shoes non-slip above, from now on you must have to wear shoes with a fear of slipping. You can make any shoe slip-resistant using the above tips, which are all carefully-tried and tested.
I’m Patek Mille, creator of Work Boots Insider. I have compiled information from the most prestigious newspapers and the most skilled craftsmen, help you choose the best poducts suitable your work lives. Follow me below